Learn STAINED GLASS with simple Beginner KIT: Gryphon Grinder Tools Instructions

Description

Stained Glass Beginner
Start Up  KIT
Includes the "Stained Glass"
to get you going NOW!
(
PLUS
some clear glass to practice cutting & breaking)
Includes a NEW
GRYPHON Gryphette
GRINDER
(115volts & not suitable for Europe or Australia)
Now Included is a Free “
Memory Glass Pendant Kit
" which includes  everything  you  need  to  make 4 picture pendants
**
Instructions
**
Clear Glass
**
Hanging Rings **  Lead Free Solder
**
Special size of copper foil
Your Main Kit
(
Stained Glass Tools
)
includes:
1.
Basic Key Cutter
(Fletcher) -
dip this in oil (any light weight oil) to keep it lubricated as you score the glass.
(to “score” is scratching the surface).
Score (scratch) the glass with this cutter then use the Ball End to tap the underside of glass where you’ve scored!
2.
Breaker -  combo breaker / grozier plier
-
This helps with those curves & small pieces of glass you are trying to break just right.
Hold it with the curved Side Down (make it smile at you & you know you have it in the correct position).
Nose the breaker up to the score (scratch) line snapping glass downward.
Use practice glass until you’ve mastered this technique.
3.
Gryphon Gryphette Grinder
-
To smooth the rough edges & make pieces fit perfectly! This is a high quality GRYPHON grinder & comes with a 5 year warranty. Includes 3/4" Diamond Grinder Bit.
Gryphon Gryphette Grinder
The Gryphette offers the best value in a glass grinder today. The small enclosure houses a surprisingly powerful DC motor. Even when using 1" diamond bits, it is virtually impossible to stall the motor.
The Gryphette is the perfect grinder for the occasional glass artist, student or classroom. The convenient size will be appreciated by everyone who does not require the features of a larger grinder.
PDF spec sheet
Features
Powerful DC Motor
Standard 3/4" bit
Accepts all standard bits
Simple Design
Outstanding Value
Optional Face Shield
Five year limited warranty
Motor:
0.67 amp
Motor speed:
3000 rpm
Worksurface:
6.75" by 6.75"
Base:
7.75" by 7.75"
Base Height:
6.25"
Weight:
6 lbs
Water Feed:
Sponge
Warranty:
5 years
Shaft Diameter:
5/16"
Face Shield:
Optional
Fuse:
3 Amps, Fast Acting
4.
(11 pieces) of a Colorful Mix of Stained Glass
-
Variety of Stained Glass colors to start you going NOW   (PLUS some clear glass to practice your cutting and breaking with)
5.
Copper Foil *
7/32
"
Wide (most popular) 36 Yard NEW roll
Peel backing & stick copper completely around edge of glass. You'll come around glass & overlap where you started.
Tears off easily!
Be sure to press the foil into the glass (burnish) so that it stay's put when you start soldering your sun catch together.
6.
Flux (8 oz. bottle) & Acid/Flux Brush
Liquid flux is brushed on copper foiled glass, prior to soldering.
This is the chemical necessary to make the tin/lead solder stick to the copper.
If your solder is not flowing, apply more flux, it really helps!
7.
Pound roll of Solder
- 60/40
(60% tin 40% lead)
AND a
100 watt Soldering Iron
-
H
eat Iron up & melt away the solder onto the copper.
Turning everything that is copper to silver.
Using your professional 100  Watt Soldering Iron.
Have a large wet rag handy,
b
unch it up & very carefully wipe the tip of the iron from time to time while it's HOT.
This also helps keep the solder cleaner!
8.
10 GREAT Beginner Patterns & Complete Instructions -
You'll make suncatchers to get you accustomed to doing each step!
Ship's - within the U.S.A.
If you are in
Hawaii,
Alaska
or
Puerto Rico
You will pay more in shipping